Program Out Connection (Prog Out); Onnection (Prog Out) - Panasonic PT-47WXD63 Technical Manual

Program Out Connection (PROG OUT)

You can connect a VCR to the PROG OUT terminal to record the program
are viewing on-screen. An external monitor can a
O UT and TO AUDIO AMP terminals. Connect the VCR as shown below.
Procedure
• Connect the VCR to PROG OUT and TO AUDIO AMP terminals
• PROG OUT terminal display is the same as on-screen display. See the
VCR instruction manual for further instructions for recording the
program.
Notes:
• This TV contains Video and Audio Outputs for the purpose of recording
televi sion programming to VCR. Due to license restrictions, if a device
(STB, DVD, etc.) is connected to the HDMI input of the TV, no video or
audio output is allowed.
• Program Out signal may not be available when component input is
selected for main picture.
• Program Out signal is available when receiving digital channel. Howeve
a ll digital formats are down converted to composite NTSC video.
• When receiving digital or analog channel signals and the analog or digital
CC is ON, Program Out connector will output open caption text in the
NTSC video picture. If CC is OFF, only analog CC closed caption code is
passed out from the Program Out connector.
•
Certain program content output from the Program Out connector may
have the Macrovision signal modification applied to its signal, preventing
VCRs from recording this video signal.
lso be connected to the PROG
Figure 17
36
you
r,