Program Out Connection - Panasonic PT-53X54J Manual

Program Out Connection (PROG OUT)
To use the television audio and video with optional equipment,
connect the PROG OUT and TO AUDIO AMP connections on the
back of the television.
Note: If the Main Picture signal is Component Video Input or
HDMI, no Program out signal will be available.
5! L
I_-P_4[N_SONBACK OFTELEVES_ON
.... ©
CABLES NOT INCLUDED
Procedure
Connect optional equipment to PROG OUT and TO
AUDIO AMP L/R terminals.
PROG OUT terminal display is the same as on-screen
display.
See optional equipment manual for further instructions
for recording and monitoring.
HDMI (High Definition Multimedia Interface)
input connection
About HDMI
HDMI is the first all digital consumer electronics A/V
interface that supports several uncompressed standards,
enhanced and high definition video formats as well as
existing multi-channel audio format. One jack supports both
video and audio information. The HDMI/HDCP 1 input can
be connected to an EIA/CEA 8612 compliant consumer
electronic device,
such as a set
top
box or DVD
player
equipped
with an HDMI or DVI
output connection. By
inputting a High-bandwidth Digital
Content Protection
(HDCP) high definition picture
source to the HDMI terminal
of this
PTV, high definition pictures
can be
displayed
on the
screen in their
digital
form. The HDMI
input
terminal is not
intended to be used with
personal computers.
This PTV is
compatible
with 1080i,
480p
and 480i formats. Select the
output
of the
connecting
device to match that of the PTV.
Notes:
1.
HDMI/HDCP = High Definition Multimedia Interface /
High-Bandwidth Digital Copy Protection.
EIA/CEA-861 Profiles compliance covers profiles for
transmission of uncompressed digital video including
high bandwidth digital content protection.
OPTIONAL EQUIPMENT CONNECTIONS
Compatible formats
This PTV is compatible with the following formats. Please
set the connecting device to the following format.
Video signal
1080i 1920 x 1080i 59.94 / 60
480i (480p) 720 x 480p 59.94 / 60
640 x 480p 59.94 / 60
480i (480i) 720 x 480i 59.94 / 60
Audio signal
When digital audio is included in the HDMI connection,
the compatible sampling frequencies are 48 KHz /
44.1Khz / 32 Khz.
Connection diagram
Follow the diagram below to connect the PTV to a set top box or a
DVD player.
I HDMI
I AVlN
TERMINALS ON BACK OF TELEVISION
video
_,@@ @@@
o o@fl
3 OUT TO AUDI{
CABLES NOI INCLUDED
Note: Use an©log audio when no digita_
audio is available. +
EXTERNAL D_G_TAL
CO_PONENT
* The connector on the PTV is HDMI Type A connector.
Procedure
Connect the HDMI output from the set top box or a DVD
player to the HDMI input on the back of the PTV.
Press TV/VIDEO button on the remote control to select
HDMI input. The interface on the PTV is an HDMI Type A
connector.
If the external device has a DVl output only, use a DVl to
HDMI adaptor cable .3 to connect to the HDMI jack on
the PTV. Also, connect the Audio Out signal from the
external device (set top box or DVD player) to the Audio
In .4 jacks below the HDMI input.
If you cannot display the picture because your Digital Set
Top Box does not have a Digital Out terminal setting, use
the Component Video Input (or the S-Video Input or
Video Input). In this case, the picture will be displayed as
an analog signal.
Notes:
*3.
*4.
HDMI-DVI conversion cable (TY-SCH03DH) available
on Panasonic Website: www.panasonic.com.
Please refer to page 20 for Audio setting detail.
9o