Service Mode (Electronic Controls) - Panasonic PT-47WXD63 Technical Manual

Service Mode (Electronic Controls)

a) Press the Menu button on the remote control to access the service menu.
b) Use the CH
menu.
c) Press the OK button to enter the Setup mode.
VOL or VOL
d) Press the
function.
e) Use the VOL
f) Press the Menu button twice to exit the setup menu.
g) Press the CH
highlighted.
h) Press the OK button to access the timer settings.
i) Press the CH
adjustment.
VOL or VOL
j) Use the
higher.
k) Press the Menu Action button, as many times as needed, to exit the timer
mode.
l) Tune the set to channel 124.
m) Using the front control panel of the PTV, press and hold the Volume Down
button until CHK is displayed in red in the upper left-hand corner of the
screen.
n) Select an active channel or video source.
To toggle between aging and service modes:
While the "CHK" is displayed on the left top corner of the CRT, pressing the
"OK" and VOL
buttons on the TV simultaneously will toggle between the
modes. Red "CHK" is for service mode and yellow "CHK" for aging.
• Press the POWER button on the
remote control to display the
service adjustment menu. Select
the adjustment by pressing the
CH or CH
VOL
buttons on the remote
and OK to enter the adjustment.
or CH VOL or VOL
and
button to access the Program Channel
button to change to cable mode.
or CH V OL or VOL
and
or CH
Channel Up button to access the sleep timer
button to adjust the sleep timer to 30 minutes or
VOL or
and
87
button to highlight the Setup
until the timer function is
Figure 49