Table of Contents
Advertisement
Installation
How to connect the "1, 2, 3, 4" Input Terminals
Connects
VCRs and other peripheral
equipment
(VHS VCR or Super-VHS VCR)
Au_
wd_o
S Wd_
R
OUT
L
OUT
OUT
®®®@
AUDIO
Notes:
(1) Similar connections are available at the INPUT 1, 2, 3, 4 input terminals.
Input 4 is located on the front of the unit.
Select the desired VIDEO input position by pushing the TV/VIDEO button. (See page 15)
(2) When connecting video cables, priority is given to the S Video cable when the S Video input terminal and the video
input terminal are connected at the same time.
How to connect the AV Prog. Out Terminals
The "Prog. Out" Terminals output the same signals as the main picture on the projection TV screen and sound from the
speaker at that time, e.g. TV programs or signals from INPUT 1, 2, 3, 4 terminals.
Recording Equipment
(VHS VCR)
Audto
Vid_
S Video
out L
OUT ou,
',,
O
,I. ,!,
_:_
,_ @
,,©
,,©
V,D O
AUDIO
Notes:
(1) Never connect the VIDEO IN and Prog. OUT terminals to the same video recorder, as this could cause incorrect operation.
(2) The monitor output emits the main picture's normal video and audio signals.
(3) Even if the television is in picture-out-picture
condition, Prog. OUT terminals output the same signals as main picture on
the screen and sound from speaker. Sub picture including still, channel search, etc. will not be output at the PROG.
OUT terminals.
(4) Signal (Y, PB, PR) is not output at the Prog. OUT terminals.
(5) To AUDIO AMP terminals cannot be used directly with external speakers.
10
Advertisement
Table of Contents
