Arrow Revolution Installation Instructions Manual page 13

Register / Change PIN Codes (including Supervisor Code) through I-Button
1 2
Unscrew battery
Press the
cover hex screw
time.
using tool
provided. Slide
battery cover up
and off to reveal
the button
located above the
batteries.
Lock Response:
Register User code.
Enter one Supervisor
then up to 8 users.
Enter a 4 to 12 digit
PIN code, each fol-
lowed by the
Press the
to complete."
1
Feature Programming Through Menu Mode via Supervisor Code
Menu
mode, enter number, press
the key to continue
Press the
3
Enter the new Supervisor PIN
button one
code (4 to 12 digits), followed by
the key.
Lock Response: Sounds a tone for
each PIN code digit with digits
flashing in the sequence entered
to confirm the entry. Chime sig-
nals when playback is complete.
key.
button
2 3
S
1
S
Note: When registering User codes, the code
must be entered with in 20 seconds. If time
expires, no codes are registered and the process
must be re-started.
4
Enter the first User PIN code (4 -
12 digits) followed by the
Lock Response: Sounds a tone for
each PIN code digit with digits
flashing in the sequence entered
to confirm the entry. Chime sig-
nals when playback is complete.
Continue to enter add User
PIN codes (4 to 12 digits each)
followed by the
eight User PIN codes can be
entered.
4
U
2 3
Register User Code
Passage Mode
Silent Mode
Language Setting Mode
5
Press the button
key.
to complete the
process after the last
playback sequence.
Lock Response:
Registered."
key. Up to
5
1 - 8
4
U
1 - 8
Enable
Disable
Enable
Disable
English
Spanish
French