Dell Precision 5820 Owner's Manual page 74

Option
SATA Operation
Tower 5820
Drives
Tower 5820
SMART Reporting
USB Configuration
Front USB Configuration
74 System Setup
Description
Allows you to configure the operating mode of the integrated SATA
hard-drive controller.
Click one of the following options:
• Disabled
• AHCI
• RAID On—Default
NOTE: SATA is configured to support RAID
mode.
Allows you to enable or disable various drives on board.
The options are:
• MiniSAS PCIe SSD-0
• SATA-0
• SATA–2
• SATA–4
• ODD–0
• MiniSAS PCIe SSD-1
• SATA–1
• SATA–3
• SATA–5
• ODD–1
All the options are set by default.
This field controls if the hard drive errors for the integrated drives
are reported during system startup. This technology is part of the
SMART(Self-Monitoring Analysis and Reporting Technology)
specification.
• Enable SMART Reporting
This option is not set by default.
Allows you to enable or disable the internal USB configuration.
The options are:
• Enable USB Boot Support
• Enable Front USB Ports
• Enable Internal USB Ports
• Enable USB 3.0 Controller
• Enable Rear USB Ports
All the options are set by default.
Allows you to enable/disable Front USB ports.
The options are:
• USB3 Type A *
• USB Type C port 2 (Right) *
• USB Type C port 1 (Right) *