PP Systems TARGAS-1 Operation Manuals page 133

10 Host Measure Format
11 Host Measure Interval
(seconds)
12 Memory Measure Format
13 Memory Measure Interval
(seconds)
14 WIFI Measure Format
15 WIFI Measure Interval
(seconds)
16 Display Measure Format
17 CRC
18 Web Monitor
19 Host Serial
20 Chamber Volume
(cc)
21 Chamber Area
(Cm^2)
22 CO2 limit (ppm)
23 Time Limit (Sec)
24 Plot Number
25 Used Absorber (mm^3)
26 Absorber Volume (mm^3)
27 Syringe Volume
TARGAS-1 Operation Manual V. 1.02
See MH Format
Time between records.
Use '0' for manual mode
to stop broadcast.
See MM Format
Time between records
See MW Format
Time between records
See MD Format
Note: Interval time is
always 1 second.
Determines whether a
CRC-8 will be appended
to each command sent
from the TARGAS. This
works for the Host only.
Note: the Display always
gets a CRC-8
Adds terminator to strings
sent to the WiFi Port to
use for web pages
Selects which Serial Host
input to use: the USB or
Wi-Fi (port2)
The Volume of the
measuring chamber in
CCs
The measuring Area of
the Chamber
The co2 sampling limit
The sampling time limit
Plot number (not saved in
EEprom)
Defaults to 1 on power up
The amount of absorber
material used in doing
zeros (mm^3)
The number of ml the
Zero column holds
The sample volume of
gas (CCs)
133
0 = Cal 1
1 = MH
2 = MD
3 = MM
4 = MW
0 - 3600 1
n/a n/a
0 - 3600 0
n/a n/a
0 - 3600 0 (Manual)
n/a n/a
0=Off; 1=On 0 (Off)
0=Off; 1=On 1 (On)
0 =USB 0 (USB)
1 = Wi-Fi
10-100000 1171
1- 10000 78
1-1000 50
10-300 60
1-1000 1
0-100000 *
100-100000 20000
1 - 1000 10
support@ppsystems.com