Voice Control System Settings; Wi-Fi - Mercedes-Benz COMAND Supplement Manual

Wi-Fi

36

Voice Control System settings

Opening/closing the help window
i
If the set system language is not supported
by the Voice Control System, English will be
selected.
The help window also shows you information on
audible instructions:
during individualization
R
during subsequent operation of the Voice
R
Control System
Press Vehicle Vehicle in the main function bar.
X
The vehicle menu is displayed.
To switch to the menu bar: slide 6 the con-
X
troller.
To select System Settings System
X
the controller.
A menu appears.
To select Voice Voice Control Control: turn and press the
X
controller.
To activate O or deactivate ª
X
dow dow: turn and press the controller.
More information on the Voice Control System
is available in the separate operating instruc-
tions.
Individualization
Using individualization, you can fine-tune the
Voice Control System to your own voice. This
will help improve voice recognition; see the sep-
arate operating instructions.
Wi-Fi
Overview
Establishing a Wi-Fi connection between the
multimedia system and a Wi-Fi-enabled device,
such as a tablet computer or smartphone,
requires the following:
Wi-Fi must be activated on the multimedia
R
system and on the device to be connected.
Settings: turn and press
Help Win‐ Help Win‐
If the multimedia system is to be used as a Wi-Fi
hotspot:
The multimedia system must be connected to
R
an Internet-enabled mobile phone via Blue-
tooth ® or USB.
The Internet access data for the mobile phone
R
network provider must be selected or set in
the multimedia system
An Internet connection must be established
R
on the multimedia system.
Activating Wi-Fi
To select Vehicle Vehicle from the main function bar:
X
turn and press the controller.
To switch to the menu bar: slide 6 the con-
X
troller.
Select System Settings System Settings.
X
Select WiFi. WiFi
X
The Wi-Fi menu appears.
Select Activate Activate.
X
Press the controller.
X
Switch the connection on O or off ª,
depending on the previous setting.
Connecting the device
General notes
The exact Wi-Fi connection procedure may vary
depending on the device to be connected. Fol-
low the instructions that are shown in the dis-
play. Further information; see the manufactur-
er's operating instructions.
Connecting a device via WPS PIN
Requirement: for this type of connection, the
device to be connected must support "Connect
using WPS PIN".
To select Vehicle Vehicle from the main function bar:
X
turn and press the controller.
To switch to the menu bar: slide 6 the con-
X
troller.
Select System System Settings Settings.
X
Select WiFi. WiFi
X
The Wi-Fi menu appears.
Select Connect via WPS Connect via WPS PIN
X
Select the vehicle from the device to be con-
X
nected and "Connect using WPS PIN". The
PIN.