Smoker Assembly - Smoke hollow ES3018M Owner's Manual

Fig. 1B
Carton Foam
Right Rear Leg
Right Front Leg

Smoker Assembly

Fig. 2A
Fig. 1A
Fig. 1C
Right Grease
Tray Rail
Left Rear Leg
Left Front Leg
7
Hardware Needed:
(4) M4x17mm Tapping Screws
STEP 1:
First, remove the door from the cabinet
(Fig. 1A).
Turn Smoker Cabinet with the rounded
top down and use the foam pieces from
the carton to stabilize the Cabinet from
moving (Fig. 1B). Attach the Right Grease
Tray Rail and the Left Grease Tray Rail
using (4) M4x7mm tapping screws as
shown (Fig. 1C).
Left Grease
Tray Rail
Hardware Needed:
(8) 1/4-20x1/2" Bolts
STEP 2:
Attach the Legs to the cabinet base as
shown here (Fig. 2A).
Now flip Cabinet over and sit on the Legs.
You can now reattach the door (Fig. 2B).
Fig. 2B