Care & Cleaning - Crock-Pot CPE200 User Manual

To Change a Setting
It's easy to switch functions during cooking.
Press the START/STOP button and then select
the new desired cooking function. A new
timer will flash on the Display Screen, and the
selected function will also flash. Select the
desired time, pressure, and/or temperature.
Press the START/STOP button and the new
function will begin preheating.
To Change the Cooking Time
You can change the cooking time before
cooking begins by pressing the + and -
buttons before pressing START/STOP. Press
and release to change slowly. Press and hold
to change time quickly. If you pass the desired
temperature or time, press the opposite
button.
Care & Cleaning
Cleaning should only be carried out when the
Express Multi-Cooker is cool and unplugged.
Allow the Multi-Cooker to completely cool
before cleaning. Do not use the removable
Cooking Pot on the stovetop, inside a
microwave oven or inside an oven. Use the pot
only inside the Express Multi-Cooker Heating
Base. Wash the Sealing Gasket and Lid by
hand in warm, soapy water. Dry all parts
thoroughly.
CPE200_18EM3.indd 18
To Change the Pressure
You can change the pressure on certain
pre-set functions before cooking begins by
pressing the PRESSURE ADJUST button
before pressing START/STOP.
To Change the Temperature
You can change the temperature on certain
functions before cooking begins by pressing
the TEMP ADJUST button before pressing
START/STOP.
Cooking Pot
When removing the Cooking Pot from the
Heating Base, always use two hands and lift
directly upward. Failure to do so may result in
scratching the outside of the Cooking Pot (see
figure 5).
Figure 5
18
4/10/18 14:19