Options | Lamp Settings; Lamp Reset - InFocus IN119HDxa User Manual

Lamp Settings
When ambient
™
temperature is
over 40°C in
operating, the
projector will
switch to Eco
automatically.
"Lamp Mode" can
™
be indipendently
set for 2D and
3D.
Options |
Lamp Hour
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning message
when the changing lamp message is displayed.
The message will appear 30 hours before suggested replacement
of lamp.
Lamp Mode
Bright: Choose "Bright" to increase the brightness.
`
Eco.: Choose "Eco." to dim the projector lamp which will lower
`
power consumption and extend the lamp life.
Dynamic: Choose "Dynamic" to dim the lamp power which will
`
be based on brightness level of the content and adjust lamp
power consumption between 100% and 30% dynamically. The
lamp life will be extended.

Lamp Reset

Reset the lamp hour counter after replacing the lamp.
Exit
Exit the Lamp Settings menu.
User Controls
IMAGE DISPLAY
OPTIONS Lamp Settings
Lamp Hour
Lamp Reminder
Lamp Mode
Lamp Reset
Exit
UpDown Select
SETUP OPTIONS
Off
Dynamic
Exit
49
English