Proper Installation; Operating Voltages; Lcdi Power Cord - Amana PTAC Service Instructions Manual

PROPER INSTALLATION

OPERATING VOLTAGES

Use a voltmeter, check the voltage at the outlet.
The reading must be within the minimums and maximums shown below for the operating voltage.
• LCDI or AFCI Power Cords - Underwrites Laboratories and the National Electric Code (NEC) now require power cords that
sense current leakage and can open the electrical circuit to the unit on units rated at 250 volts or less. In the event that
unit does not operate, check the reset button located on or near the head of the power cord as part of the normal
troubleshooting procedure.
WARNING
USE EXTREME CAUTION WHEN CHECKING HIGH VOLTAGE.
O perating Voltages
Unit Voltage
Rating Minimum Voltage
1 1 5
230/208
265

LCDI Power Cord

Voltage Utilization Range
Maximum Voltage
1 04 1 27
1 97 253
238 292
13