Table of Contents
Advertisement
ORION PDP
5.7.
Selecting the command transmission method
y
OnE LCD
:TransmitProtocolCommandtooneMLCD.
y
aLL LCD
:TransmittheProtocolcommandsequentiallytoallconnectedMLCDsets.
y
Broadcast
:TransmittheProtocolcommandsimultaneouslytoallconnectedMLCDsets.
y
InordertocontrolpowerofspecificMLCD,use"PowerOn/Off"buttonafterselectingthe
specificMLCD.
MLCDControl-PowerOn/Off
Please wait for at least 10 seconds before executing "Power On" command after
the first AC power connection. If not, it may cause abnormal behavior.
Caution
Please disconnect AC power and reconnect in case of abnormal behavior.
- 32 -
Infinitely Expandable
5.8.
Changing the input source
y
Varietiesofscreenformationsareavailablewithscreenconfiguration.
y
SelectDVI,PCorVideoattheInputSelectmenu.
1.
If you select DVI and click Play button at the Input Select menu, the input
source will be changed from PC to DVI .
-
In case you do not select a screen and click Play, the input source for the all screen will be
changed.
SelectDVIattheInputSelectmenu
※ I nput source is not displayed on the MSCS screen, but it is indicated by colors.
(DVI : Yellow
PC : Green
Video : Gray)
- 33 -
MLCD
Advertisement
Table of Contents
