Section 2: Applications - Omron CP1H Application And Setup Manual

Section 2: Applications

The CP1W-ETN01-US is an Ethernet to Serial adapter that has been designed to allow
the use of a single operator interface terminal (NS, NSA, Indusoft) as well as a single
instance of CX Programmer to communicate simultaneously to a CP1H or CP1L PLC.
The adapter will not support more than 2 simultaneous connections.
PLC to PLC communications using Ethernet are not possible, as the adapter only
functions as an Ethernet slave device.
Unlike Omron Ethernet modules for CS / CJ PLCs, the CP1W-ETN01-US is not capable
of routing messages through multiple FINS networks. The CP1W-ETN01-US must
communicate with a PC / NS HMI that is on the same FINS network as the PLC adapter
itself.
Page 3 of 8