B.O.L.T VA 01 User Manual page 8

B.O.L.T User Manual
Removing USB Plug
 The user can remove the USB Plug while charging the device.
 The user is recommended to insert the given lemo connector plug in the accessory
connector port when accessories are not connected.
Inserting Lemo Connector Plug
 The user can remove the Lemo connector plug while connecting the accessory.
 Keep the USB plug and Lemo connector plug safe and use as per the above
instructions to protect the device from dust and to meet the ESD requirements.
 Please do not use the same cuff for patients who are highly infectious as this practice
may cause cross-infection.
 Do not use the cuff other than arm area.
 Use dust cover for the IR Thermometer probe during the temperature measurement.
 Dust covers are meant for Single user / Single use only.
 If the thermometer probe is ever accidentally used without a dust cover attached the
readings may be incorrect. In that case, clean the lens with a soft cloth or cotton swab
moistened with alcohol.
 Place the finger inside the SpO2 probe properly during SpO2 measurement.
© Copyright 2018, All Rights Reserved. American Megatrends India Private Ltd.
Zoomed View
Removing Lemo Connector Plug
Model No: VA 01
8