Blood Oxygen Level Measurement Procedures; Blood Oxygen Level Measurement With B.o.l.t - B.O.L.T VA 01 User Manual

B.O.L.T User Manual

11. Blood Oxygen Level Measurement Procedures

Mandatory instructions to be followed during blood oxygen level measurement
 Remove nail polish or dirt present on the finger before the measurement.
 Clean the surface of the fingertip before the measurement.
 Relax yourself/user in a comfortable position.
 Remain stable during the measurement.
 Place the index finger properly inside the SpO2 probe.

11.1 Blood Oxygen Level measurement with B.O.L.T

B.O.L.T enables connecting a SpO2 probe through which the blood oxygen level is measured.
Connecting SpO2 probe with the gadget
Insert the SpO2 connector into the socket firmly as shown below.
Measuring Blood Oxygen Level with B.O.L.T
1. Clean the rubber pad of the SpO2 probe touching the finger gently with a soft cloth
dampened with 70% isopropyl alcohol and let air dry or use a soft dry cloth to clean
before measurement.
2. Clean your hands with hand wash before the measurement.
3. Select "Check Vitals" option to perform the individual test and continue.
4. Clip the SpO2 probe in the index finger of the person to be measured in right/left
hand as displayed above.
5. Select the Blood Oxygen option from the application screen.
© Copyright 2018, All Rights Reserved. American Megatrends India Private Ltd.
Model No: VA 01
14