Table of Contents
Advertisement
Introduction
This manual describes the procedures for mounting the NP-LV01BD mandatory option kit onto the NEC PH3501QL/
PH2601QL projector, as well as installation, connections and adjustments. For safe and correct installation, adjust-
ment and maintenance of the projector, carefully read this document before considering the layout of the unit and
installation. Please keep this document under care by the company who installed or adjusted the projector. This
document is intended the readers who have basic knowledge about projector installation. Refer to the user's manual
of an applicable projector for basic operation and remarks.
The product name used in this manual
In this manual, the device name is written as listed below. If the function has difference by devices, the product name
is written in the text.
PH3501QL/PH2601QL: This product or the projector
NP-LV01BD:
• DLP
and the DLP logo are trademarks or registered trademarks of Texas Instruments in the United States and other
®
countries.
• Other product and company names mentioned in this user's manual may be the trademarks or registered trademarks
of their respective holders.
• Illustrations shown in this manual may differ slightly from the actual ones.
NOTES
(1) The contents of this manual may not be reprinted in part or whole without permission.
(2) The contents of this manual are subject to change without notice.
(3) Great care has been taken in the preparation of this manual; however, should you notice any questionable points,
errors or omissions, please contact us.
(4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed
to result from using the Projector.
LV unit
Advertisement
Table of Contents
Need help?
Do you have a question about the NP-PH3501QL and is the answer not in the manual?
Questions and answers