Table of Contents
Advertisement
24
Technical data
Problem
Dry water drop stains on
glasses and dishes.
The dishes are wet.
The dishes are wet and matt.
Activating the rinse aid dispenser
1. Open the menu option.
2. Go to Settings .
3. Press the OK touchpad to open the submenu.
4. Go to Rinse aid and activate the rinse aid dispenser.
5. Press the OK touchpad.
6. Press the return touchpad to close the menu option.
TECHNICAL DATA
Dimensions
Water supply pressure
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of the appliance door shows the electrical connection
data.
If the hot water comes from alternative sources of energy, (e.g. solar panels, photovoltaic
panels and aeolian), use a hot water supply to decrease energy consumption.
The rinse aid quantity is too
low.
The detergent can be the
cause.
The washing programme was
without a drying phase or with
a decreased drying phase.
The rinse aid dispenser is emp-
ty.
The multitab function is on
(this function automatically
deactivates the rinse aid dis-
penser).
Width
Height
Depth
Minimum
Maximum
Cold water or hot water
1)
Place settings
Possible cause
Possible solution
Increase the rinse aid quantity.
Use a different brand of deter-
gent.
For better drying results, keep
the door ajar for some minutes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
maximum 60 °C
596 mm
850 mm
625 mm
12
Advertisement
Table of Contents
