Table of Contents
Advertisement
22
What to do if...
If the holes in the spray arms become clogged, remove remaining parts of soil with a thin
pointed object.
To clean the external surfaces
Clean the external surfaces of the appliance and control panel with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive cleaning pads or solvents (acetone).
WHAT TO DO IF...
The start of the appliance does not occur or it stops during operation.
Try to find a solution to the problem. Refer to the indications in the table.
With some malfunctions, the display shows a message and an intermittent acoustic sig-
nal operates.
WARNING!
Deactivate the appliance before you do the checks.
Malfunction
The appliance does not fill with
water.
The appliance does not drain
the water.
The anti-flood device operates.
The start of the washing pro-
gramme does not occur.
Possible cause
The water tap is blocked or
there is limescale on it.
The water pressure is too low.
The water tap is closed.
The filter in the water inlet
hose is blocked.
The connection of the water
inlet hose is not correct.
The water inlet hose is dam-
aged.
There is a blockage in the sink
spigot.
The connection of the water
drain hose is not correct.
The water drain hose is dam-
aged.
The appliance door is open. A
message shows in the display.
You did not press the start
touchpad.
The mains plug is not connec-
ted in the mains socket.
Possible solution
Clean the water tap.
Contact your local water au-
thority.
Open the water tap.
Clean the filter.
Make sure that the connection
is correct.
Make sure that the water inlet
hose has no damages.
Clean the sink spigot.
Make sure that the connection
is correct.
Make sure that the water drain
hose has no damages.
Close the water tap and con-
tact the service centre.
Close the appliance door.
Press the start touchpad.
Connect the mains plug.
Advertisement
Table of Contents
