Rear Panel View; Rear Panel Description - B&K AVP 4090 Owner's Manual

The AVP back panel is organized into groups of inputs and outputs for audio and video
as shown below.
1. Power switch
2. AC fuse holder
3. AC input receptacle
4. Video outputs
5. Video inputs
6. Digital inputs
7. Send/RCV jacks
8. Preouts
1. Power switch -
For switching AC power to the AVP preamplifier. Off = O, On = I. The
rocker must be in the on (I) position for the preamplifier to operate.
2. AC fuse holder -
Holds the AC Line fuse. Replace only with 0.5 A (½ A) 250 V fast blow
fuse.
3. AC input receptacle
For attaching the supplied AC power cord to the preamplifier.

Rear panel view

9. Analog audio inputs
10. AM antenna input
11. FM antenna input
12. Tape loop
13. V1 loop
14. V2 loop
15. CTRL OUT / IR IN jacks
16. Surround outputs

Rear panel description

-
Page 8