Specifications - Wavtech linkD Owner's Manual

Specifications
Frequency Response
Input Impedance
Input Sensitivity
Max Input Voltage
Output Impedance
Max Output Voltage
THD+N
S/N
Turn-On Trigger
Remote Output
Current Draw
Operating Voltage
Product Dimensions
Notes:
Speaker level input sensitivity range is selectable per channel via internal jumpers (20V/40V)
Ÿ
DC-offset and/or audio signal detect functions are defeatable via internal jumpers (DC, AUD)
Ÿ
All specifications are subject to change without notice
Ÿ
Max Flat (+0/-1dB)
Extended (+0/-3dB)
Spk Input
RCA Input
Spk Input (max-min gain)
RCA Input (max-min gain)
Spk Input peak, <5sec cont.
at 1% THD+N
Spk Input at 10V output
RCA Input at 10V output
at 1V output
Spk Input
at 4V output
at 10V output
at 1V output
RCA Input
at 4V output
at 10V output
Remote via REM IN
via Spk Input
DC-offset
via Spk Input
Audio Signal via RCA Input
Turn-off Delay
Current Capacity
Voltage
Max Draw (w/o REM OUT)
Sleep Current
Power On (B+)
Power Off (B+)
Chassis (not incl. terminals/jacks)
<10Hz to >75kHz
<10Hz to >100kHz
180Ω
20kΩ
2-20Vrms / 4-40Vrms
0.5-5Vrms
40Vrms
<50Ω
>10Vrms
<0.1%
<0.01%
>95dBA
>105dBA
>112dBA
>98dBA
>110dBA
>115dBA
>10.5V
>1.3V
<100mV
<10mV
up to 60sec
>500mA
Within 3% of B+
<200mA
<1mA
10.5V-18V
<8.5V
1.1"x2.9"x2.8"
29x75x72mm
8