Related Manuals for Wavtech Link8
Summary of Contents for Wavtech Link8
- Page 1 8-Channel Line Output Converter Summing Ÿ AUX Input Ÿ Multi-Function Remote Owner’s Manual www.wavtech-usa.com...
- Page 2 This symbol means important instructions. WARNING Failure to heed them can result in serious injury or death. This symbol means important instructions. CAUTION Failure to heed them can result in injury or property damages. WARNING • DO NOT DRIVE WHILE DISTRACTED. Any function that requires your prolonged attention should not be performed while driving.
- Page 3 “ Œ Power Indicator: This red LED indicates when the link8 is powered on. Once illuminated, there will be a short delay before audio signal output is enabled. During initial power connection, the LED may illuminate for a brief period.
- Page 4 If a gain difference between channels is desired with direct signal input, adjustments made at the link8 should also minimize amplifier gain settings for best S/N. Note that the gain adjustment will be bypassed if its input select is set to copy the previous channel pair.
- Page 5 flashing red, solid blue and flashing blue. In the default system Type-1, the only LED indication is solid red when the link8 is powered on. For the other three system types, solid red indicates Main speaker level source is selected and solid blue is for AUX source. Flashing indicates CH7/8 level mode is active for the current source, which will timeout after 5 seconds if no adjustments are made.
- Page 6 Remote Input (REM IN): If the source unit has a remote output wire (provides +12V only when turned on), connect it to the REM IN terminal. If a remote lead is unavailable, the link8 is also enabled with an automatic turn-on circuit that detects audio signal from SPK and AUX inputs, as well as DC-offset from SPK inputs.
- Page 7 Ÿ For systems with a main speaker level source that will serve as the master volume control, and an auxiliary source is connected to the link8, select system Type-2 at the multi-function remote. This provides AUX volume control as well as independent CH7/8 level adjustment for both main and AUX sources.
- Page 8 CH7/8 OUT Note: For systems where no full-range signal is available, the link8 can be utilized purely as a 4-way summing line output converter without remote. In this example, the link8 is summing factory 4-way signals to a single pair of 2-channel full-...
- Page 9 Ÿ (size/location, etc.) Subwoofer(s) Ÿ (size/location, etc.) Amplifier(s) Ÿ (location, output voltage, etc.) Other: Ÿ link8 Connections & Settings Installed Location: Ÿ Wiring (connection locations, signal type, turn-on mode, etc) Ÿ Settings Ÿ (gain, max master vol, crossover, etc.) Other: Ÿ...
- Page 10 Specifications Max Flat (+0/-1dB) <10Hz to >70kHz Frequency response Extended (+0/-3dB) <5Hz to >100kHz Spk Input 180Ω Input Impedance AUX Input >50kΩ Spk Input (max-min gain) 2 - 20Vrms Input Sensitivity AUX Input (max-min gain) 0.5 - 5Vrms Spk Input <5sec 40Vrms Max Input Voltage (peak)
- Page 11 Warranty & Service Care Wāvtech warrants this product to be free from defects in material and workmanship for a period of one (1) year when purchased from an authorized Wāvtech retailer within the United States. This warranty will be extended to a period of two (2) years when the installation is performed by an authorized Wāvtech retailer.
- Page 12 Wāvtech™ 7931 E. Pecos Rd Suite 113 Mesa, AZ 85212 (480) 454-7017 ©Copyright 2017 Wāvtech, LLC. All Rights Reserved.