Figure 2-3 Gdu 700P Features And Controls - Garmin G600 Maintenance Manual

The GDU 700P has numerous features and controls as shown in Figure 2-3. These features and controls
are:
• Power Button - Pressing and releasing the power button with the unit powered on will cause a
dialog box to appear that allows the display to be powered off or under certain circumstances
switched to a backup display layout. Pressing and holding the button for 5 seconds will power off
the display with no further prompt.
• Photocell - The photocell may be configured to be used by the display to automatically adjust the
display back-lighting in reference to ambient light conditions.
• Top Card Slot - A Card slot in the display that accepts standard SD cards. See Section 2.1.5 for
more information on SD card options.
• Bottom Card Slot - A Card slot in the display that accepts standard SD cards. See Section 2.1.5 for
more information on SD card options.
• Dual Concentric Knobs - Control knobs that can be used to scroll and select through various
options on the display. The outer knob is used to scroll through available screens on the PFD or
MFD. Pressing the knob acts as an enter or selection of the currently highlighted information.
190-01717-B1
Rev. 1

Figure 2-3 GDU 700P Features and Controls

G500/G600 TXi Part 23 AML STC Maintenance Manual
Power Button
Photocell
Top Card Slot
Bottom Card Slot
Dual Concentric Knob
Page 2-6