Traps Table - Airspan ASWipLL User Manual

M a i n W i n d o w - T o o l s M e n u W i p M a n a g e U s e r ' s G u i d e
To search for a device:
1. Select the Search by MAC Address check box, and then enter the SPR's MAC
address. The entered MAC address must include six digits.
2. Click the Search Device button .

7.7. Traps Table

The Traps Table command displays the Traps table, which lists all the traps saved
in the WipManage database. To enable the display of these traps in this table, see
Section 4.10.7, "Saving Traps to the WipManage Database".
The path for this command is as follows:
!
Path: Tools > Traps Table
The Traps Table window is displayed below.
Figure 7-11: Traps Table window
7-16 Airspan Networks Inc. 24020311-08