Additional Information; Accessories; Spareparts; Warranty - Perimeter PWM600MH User Manual

~CH
5.0 ADDITIONAL INFORMATION
5.1 Accessories
The following accessories are available for the
PWM600MHTM Perimeter Wire Machine.
You are invited
to order them under the following part numbers:
o
PWMA-0001
—
DRUM FOR PERIMETER WIRE
o
PWMA-0002
—
BOX FOR PERIMETER WIRE (18 CM X 18 CM)
o
PWMA-0003
—
BOX FOR PERIMETER WIRE (22.5 CM X 22.5 CM)
• PWMA—0006
—
WIRE GAUGE
-
600MH
o
PWMA-0008
—
HIGH-RESISTANCE CARBIDE BLADE FOR 600MH
o
PWMA-0009
—
GREASE BOTTLE GS1000
-
2 OZ
5.2 Spare parts
Spare parts are available from your distributor or by contacting us directly. Please refer to the exploded
view in ANNEX 1 at the end of this manual to identify the part numbers.
5.3 Warranty
The
PWM600MHTM Perimeter Wire Machine
by
Portable Winch Co.
is guaranteed against all
manufacturing defects when owned by the "original owner" as defined here below.
The
"original owner"
is defined as the person or entity that purchased the machine from an authorized
dealer as shown by the original invoice. The warranty is transferable if the new buyer holds a copy of the
original invoice. This warranty does not apply to items sold
"as is".
The
PWM600MHTM Perimeter Wire Machine
by
Portable Winch Co.
is covered:
o
Engine: The Honda engine is guaranteed by
Honda Motor Corporation,
and the warranty period
may vary from one country to another and according to the type of use. All Honda service
centers may make warranty repairs, if necessary. Please keep your proof of purchase (original
invoice including the serial number of the machine). It will be used to establish the start date of
the warranty period.
o
Machine parts (other than the engine):
o 1 year warranty (serviced by
Portable Winch Co.
or retailers).
Portable Winch Co.
will repair or replace defective parts without charge for parts or labor if the part fails
due to a defect in materials or workmanship during the warranty period.
Part coveredyr.~h.ir.~y:
Parts normally maintained by the customer and that wear with normal and regular use include belts,
blade, wire guide and wire guide connector, filters, springs, plugs, starter ropes and all other parts
defined as those coming into contact with the ground or the wire.
20