Perimeter PWM600MH User Manual page 14

4.1.1 Adjusting the engine belt
1) Loosen the 4 bolts (Figure 1 and 2);
2> Apply pressure by hand to the engine mount until the
belt is tight (Figure 3);
3) Tighten the 4 bolts.
1) Loosen the 6 bolts (see Figure);
2) Move the blade transmission to achieve the
desired tension;
3) Tighten the 6 bolts.
4.1.3 Adjusting the wheels trcsnsmission belt
1) Loosen the nut with 13 mm wrench;
2) Pivot the transmission on its axis to
achieve the desired tension;
3) Tighten the nut.
~LE
(
WINCH
4.1.2 Adjustinq the blade transmission belt
18