Insertion Of Perimeter Wire In A Tight Corner - Perimeter PWM600MH User Manual

~RTABLE
3.9 Insertion of perimeter wire in a tight corner
When designing the
PWM600MHTM Perimeter Wire Machine,
every feature has been implemented to
allow burying of the wire as close as possible to the perimeter of the field and to avoid manual burying of
wire. Its compact size and the 15 cm blade offset from the outside of the wheel are good examples. The
handle is also designed to quickly and easily pivot as needed to turn a tight corner. To optimally bury
wire in a tight corner, follow the steps below:
1) Move as far as possible into the corner (depending on the distance recommended by the
manufacturer of the robot mower)
(Figure 1);
2) Loosen the handle clamping lever
(Figure 2);
3) Lift the handle until vertical
(Figure 3);
4) Turn the machine in the desired direction by grasping the arch
(Figure 4 and 5);
15