Adjusting The Handle Height; How To Overcome An Obstacle In The Ground - Perimeter PWM600MH User Manual

~CH
3.7 Adjusting the handle height
It is important to adjust the handle to a comfortable height
before working with the
PWM600MHTM Perimeter Wire
Machine.
The recommended handle position is
at the waist level, but adjust it to your
preferred height using the handle
clamping lever
(see Figures).
3.8 How to overcome an obstacle in the ground
When burying the wire in the ground, some immovable obstacles such as large rocks or roots will be
encountered. To avoid damage to the blade and/or the machine, follow the instructions below:
IMPORTANT: Do not push
the blade against the obstacle in an attempt to try to cut or displace it.
1)
Release the traction handle
(Figure 1);
2)
Push the handle upwards, trying to keep the blade and the wire guide in the soil
(Figure
2,
3) Lightly press on the traction handle to pass over the obstacle
(Figure 2, B);
4) Lower the machine so that the frame is parallel to the ground
(Figure 3, A);
5) Resume the job by pressing the traction handle
(Figure 3, 8).
14