Advertisement
EXPERTOTDR - CONFIGURING TEST / CREATING SMART CONFIG. FILE
On the Home page, select ExpertOTDR
1
icon (results page automatically displays).
Enter a name for Confi guration File and
4
press Enter to validate.
Once OTDR test is confi gured, press
1
S
to launch the acquisition.
TOP
Trace: select the active trace (multi-traces analysis)
1
Summary: summarize the events for each
wavelength
Zoom: zoom on trace
2
Shift: displace the displayed trace section
Select Cursor A and/or B
3
Allows to modify some acquisition parameters
4
before lauching a new OTDR test in ExpertOTDR
mode
Save in a sor fi le and create a txt or pdf report of
5
the results
Access Advanced functions (overlay, manual/auto
6
measurements, set event...)
Switch to full screen OTDR view
7
CREATING A DIRECTORY TO STORE OTDR RESULTS
Once results are displayed, press
1
button to display the fi le Explorer.
The traces acquired can be saved in the new
directory.
Sub-directory created
In the Results screen, press Fast Report key
1
Once saving is completed, the fi le(s) is/are
displayed in the Explorer.
Insert a USB key into one of the USB ports of
1
the Platform.
On the Home page, select File Explorer icon.
2
Files are transferred on USB
key.
Press «Exit» > «Remove USB» to correctly remove USB key from 2000 Platform (icon
If you require technical assistance, call 1-844-GO-VIAVI. For the latest TAC information, go to
www.viavisolutions.com/en/services-and-support/support/technical-assistance.
T-BERD/MTS-2000 - Getting Started Manual - PN79000002202 Rev003 - November 2015 - Copyright © 2015
PERFORMING A TEST IN ExpertOTDR MODE
F
ILE
SAVING THE OTDR RESULTS IN A FILE
TRANSFERRING FILES - THROUGH USB KEY
USB key icon (indicates
USB key is correctly in-
serted onto the Platform)
TECHNICAL ASSISTANCE
Confi gure the OTDR Test and the fi le
2
storage parameters.
S
ETUP
Select one parameter and press Save Confi g.
3
menu key to save the current confi guration.
S
/
TART
S
/S
TART
TOP
At the end of test, the results trace displays.
2
7
In the fi le Explorer, select the location where
2
the directory must be created.
FILE
Enter a name for the new directory .
4
Select the Save Mode and , if necessay, modify
2
the Fiber / Cable / Link parameters:
File Only: save exclusively the OTDR trace(s)
File + txt: save the OTDR trace(s) and generate a txt fi le
File + pdf: save the OTDR trace(s) and generate a pdf fi le
In the edition keypad, enter the fi lename or
4
press Auto Filenaming menu key.
FILE
Confi gure the OTDR test
Confi gure the fi le storage
Step1: connector check
Step2: acquisition in progress
Storage media
and directory
selected
5
Select fi les to
3
be transferred
Press
or
5
Select usbfl ash storage
6
media (& directory for
fi les storage).
1
2
3
4
5
6
Press
3
Press
5
Press
3
Press to
validate
Press
4
Press
7
).
http://
Advertisement
