Kenmore 790.4034 Series Use & Care Manual page 24

Gas built-in oven
Table of Contents

Advertisement

Before You Call
Problem
Oven portion of appliance does not
operate.
Cannot move appliance easily.
Appliance must be accessible for
service.
Oven light does not work.
Cause / Solution
Make sure the valve on the regulator is OPEN. If the valve is closed the oven will not
operate; the illustration shows the valve in the closed position and the open position. See
installation instructions for further information.
The time of day is not set. The clock must be set in order to operate the oven. See
the Clock"
on
page
13.
Be sure the oven controls are set properly for the desired function. See
Features"
starting on
page 13
manual or see
"Entire appliance does not operate."
Other Problems
Cabinets not square or are built in too tightly. Contact the builder or installer to make the
appliance accessible.
See the installation instructions for guidelines specific to your appliance.
Be sure the oven light is secure in the socket. See
24
CLOSED
OPEN
and review instructions for the desired cooking function in this
in this checklist.
"Replacing the oven light"
"Setting
"Oven Control
on
page
20.

Advertisement

Table of Contents
loading

Table of Contents