Panasonic KX-TA30889 Operating Instructions Manual page 20

2.1 Telephone Features
Charge rate setting
Allows you to change the charge rate.
Clear all of the charge indication settings before you change the charge rate, to avoid
confusion.
PT
Dial . Enter the system
password (4 digits).
• You may enter the pre-assigned
extension password (4 digits) of
extension jack 01 instead of the
system password.
AUTO DIAL
STORE
Press AUTO DIAL/STORE
(STORE) to set.
!
• The default charge rate is "1".
!
• Be sure the handset is on the cradle and the SP-PHONE button is off.
• To program, set the MEMORY switch on the proprietary telephone to "PROGRAM" or
press the PROGRAM button on a KX-T7300 series telephone.
• After programming, return the MEMORY switch to the "SET" position or press the
PROGRAM button on a KX-T7300 series telephone.
2-6
Operations
AUTO DIAL
password
STORE
Press
AUTO DIAL/
STORE.
AUTO ANSWER
MUTE
To go to another setting: Press AUTO ANSWER/MUTE
4
charge rate
Dial 4. Enter the charge rate
(0.000001 through 9999999).
• You can enter 7 digits max. excluding the decimal point.
• To enter a decimal point, press
example, enter "12
• The decimal point is a floating digit.
To go to another setting
(SELECT).
TRANSFER AUTO DIAL
STORE
To clear: Press TRANSFER (CLEAR)
and AUTO DIAL/STORE (STORE).
. To set to 12.34, for
34".
HOLD
Press HOLD (END)
to end programming.
To clear
(Reset to the
default: 1)