Charge Indication (Manager Only) - Panasonic KX-TA30889 Operating Instructions Manual

2.1 Telephone Features

Charge Indication (Manager only)

The manager (extension jack 01) can confirm, print and clear the charge setting.
There are 7 corresponding features as follows.
1) Extension charge indication and call log printout
2) Outside (CO) line charge indication
3) Account code charge indication
4) Charge rate setting
5) All clear
6) Print the charge indication
7) Budget management
Extension charge indication and call log printout
Provides you with the display of each extension charge (telephone rate).
You can confirm and clear the displayed parameter and charge.
Also you can print out a desired extension call log.
PT
Enter the system
Dial .
password (4 digits).
• You may enter the pre-assigned
extension password (4 digits) of
extension jack 01 instead of the
system password.
SP-PHONE
REDIAL
AUTO ANSWER
MUTE
AUTO ANSWER
MUTE
To go to the extension number of next extenison jack number: Press SP-PHONE (NEXT).
To go to the extension number of previous extenison jack number: Press REDIAL (PREV).
To go to the extension number of another extenison jack number: Press AUTO ANSWER/
To go to another setting: Press AUTO ANSWER/MUTE (SELECT) twice.
AUTO DIAL
password
STORE
Press
AUTO DIAL/
STORE.
To go to the extension number of next
extension jack number
To go to the extension number of previous
extension jack number
To go to the extension number of another
extension jack number
AUTO ANSWER
To go to another setting
MUTE
1
extension no.
Dial 1. Enter the desired
extension number
(100-199).
• To enter the extension number of jack number 01,
you can also press SP-PHONE (NEXT) button.
• To confirm the cleared date and time, press the
FWD/DND or MESSAGE
the previous display, press the same button again.
MUTE (SELECT).
TRANSFER AUTO DIAL
STORE
While the charge indication
is displayed
AUTO DIAL
STORE
To clear: Press TRANSFER (CLEAR) and
AUTO DIAL/STORE (STORE).
To print out the call log: Press AUTO DIAL/STORE
(STORE).
(→) button. To return to
HOLD
Press HOLD (END)
to end programming.
Operations
To clear
To print out
the call log
2-3