Sena SAVAGE Getting Started page 9

SAfEty PrEcAutiOnS
• When relevant, follow all regulations regarding the use of the camera.
(1) Do not use your camera in an aircraft, unless permitted.
(2) Turn off the camera when you are near medical equipment. Your camera can
cause interference with medical devices in hospital or healthcare facilities.
• The camera generates a low level magnetic field. Keep a safe distance between
the camera and cardiac pacemakers to avoid potential interference. Turn off the
camera immediately if your camera indicates interference with a pacemaker and
contact the pacemaker manufacturer or a physician.
• Avoid interference with other electronic devices. Your camera generates a low
level magnetic field that may interfere with unsealed or improperly shielded
electronic equipment in homes or vehicles. Consult the manufacturers of your
electronic devices to resolve any interference problems you experience.
• Never use a damaged memory card. This may result in electric shock, camera
malfunction, or fire.
• In any place where wireless communication is prohibited, such as hospitals
or airplanes, turn off the power. In a place where wireless communication is
prohibited, electromagnetic waves may cause hazards or accidents.
• When you use the product while you operating any vehicle or equipment
such as motorcycles, scooters, mopeds, ATVs, or quadbikes (hereinafter called
"transportation means"), you need to follow the safety precautions provided by
the manufacturer of the vehicle.
• When you use the product, use good judgment; never use it under the influence
of alcohol or drugs or when you are extremely tired.
CAUTION
• The helmet should be replaced after 5 to 7 years depending on use and care.
Although the outer shell is in principle capable of a longer service life, the
occurrence of material fatigue and wear to other components, as well as the
overall action of the helmet and the unknown conditions in which the helmet has
been used, make it advisable for your own safety to replace the helmet after this
period of use.
• Original components (in particular on the outer shell, inner shell and restraint
system) should not be altered or removed. The fitting of additional parts from
other manufacturers that have not been recommended can reduce the protective
effect and renders the helmet's certification and all warranty and insurance claims
invalid.
• Use only original parts, replacement parts and accessories that Sena has expressly
approved for your helmet.
• To provide adequate protection, the helmet must fit well and be securely
fastened.
• Always fasten the chinstrap before setting off and check that the fastening system
and strap are correctly in position.
• Never ride with the chinstrap unfastened or incorrectly adjusted. The chinstrap
must be correctly positioned and must not come loose when pulled. The fastener
is not correctly closed if the chinstrap becomes loose when pulled.
• Any helmet that has been subjected to a violent impact should be replaced.
• Examine the helmet for damage at regular intervals. Small scratches will not
impair the protective function of your helmet.
SAVAGE Bluetooth Open-face Helmet | 9
®
MENU