Usb Operation - LG LAC-M9600R Owner's Manual

USB operation

Playing a USB device
1 Connect one end to the USB port on your USB device and then plug the other end into
your unit's USB port.
2 After "USB CHECKING" appears, playback starts automatically.
Note
The method of files recorded in a USB memory device is the same as when using a DISC.
Moving to another driver
When connecting this unit to Multi reader, push VOL./MULTI up and hold to go to the next
driver. (Press BAND/DRV on the remote control.)
Each time you press the button, the driver modes changes.
Notes
• Do not remove an MP3 player or memory card while playing via a USB device.
• The maximum number of available files is 999 EA.
• The maximum number of available folders is 255 EA.
• Be sure to save the file in the memory card after formatting.
• There is no support for hard type external cases.
• This unit supports FAT format (512 byte/sector).
• USB Hub is not supported. When connecting this unit to a USB Hub, "USB CHECKING/NO
SERVICE" will be shown in the display window.
• Some memory sticks or cards may not be recognised depending on the type of memory
card.
• There is no support for a USB device (Card reader, USB memory stick, MP3 player) which
requires installation.
• If the connected device is not supported, "USB ERR1" or "USB ERR2" will appear on the
display window.
• Do not support USB devices that adopted the 2KB transfer protocol.
• Do not supply excess of suppling current. (The maximum suppling current is around 500 mA)
• Do not support USB devices that adopted OTG technology.
If the plug length of the USB device is under
10mm, the USB device may not be correctly
inserted or a connection failure may occur.
26