Operations - Bissell 2043 SERIES User Manual

PowerBrush Switch
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all fi lters, both pre and post-fi lters are in place. DO NOT operate your vacuum without
these fi lters.
1
Power
On/O
Switch
Turn vacuum on by pressing Power
Switch on (I - ON and O - OFF).
NOTE: The brush roll will automatically shut o when vacuum is locked in upright
position, recline to reactivate.
NOTE: Turn the Brush Roll OFF when vacuuming hard or delicate surfaces that
may be caught by the rotating brush. This could include hard wood, tiled fl oors,
small area rugs or frieze carpets that have long delicate fi bers or threads.
Adjusting the Variable Suction
1
Locate the Variable
Suction Control
suction control
Valve on the Hose
Wand Base.
Twist Valve - Marker
moves to indicate
FULL
suction level
NOTE: The vacuum will come with the Variable Suction Valve closed for full
suction power.
6
www.BISSELL.ca
2
Press the Brush Roll switch to run the
PowerBrush for carpet cleaning (brush roll
is on when light on switch is illuminated).
2
suction control
Full
To decrease the Twist Valve - Marker
Suction
REDUCED
FULL moves to indicate
amount of suction
for cleaning delicate suction level
Reduced
carpets, curtains,
Suction or rugs; twist the
variable suction valve
counterclockwise.
Brush Roll
On/O Switch
Full
Suction
REDUCED
Reduced
Suction