Assembly - Bissell 2043 SERIES User Manual

Assembly

WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
1
Slide handle into
vacuum base. Attach
with the screw that is
taped to the handle.
3 4
Slide the Crevice Tool/
Push handle end into Extension Wand Holder
base of vacuum on
down onto the middle
opposite side. of the back of base.
2
Attach hose by lining the
tabs on the cuff with the
notches on the back of
vacuum. Twist clockwise
to lock hose into place.
5
Slide the Pet TurboEraser®
tool holder down on the
top back of the base.
www.BISSELL.ca
5