Allen Organ Company Protege C-19C User Manual page 29

NOTE: Capture Memories must be unlocked (see section A-6) before you press
"Play" on the sequencer, allowing the organ's 4 memories to receive capture
information. It is a good idea to first save whatever is stored in the organ's memory
because, it will be erased by this procedure.
11. TRANSMITTING STOP DATA
This operation allows the organist to turn off the transmission and reception of
individual stop data, known in MIDI terminology as "Non-Registered Parameters". In
some cases, individual stop data (on/off) from the organ may conflict with data from an
external MIDI device. To turn OFF or ON the transmission and reception of individual
stop data, advance to the Transmit/Receive Stop window function (See Section A-2). It
will display: "TRANSMIT/RECEIVE STOPS XXX". Using the "CURSOR" button
on the Console Controller™, place the cursor on the second line after the word
"STOPS". This position is this function's status. Turn the ROTARY DIAL to select
either ON or OFF.
NOTE: General Pistons or Divisional Piston changes will still be transmitted and
received, because they are program changes.
D. QUICK REFERENCE GUIDE
a. ADVANCING THROUGH THE WINDOWS: Press the CURSOR button so as to
highlight the first letter of the first line; then rotate the ROTARY DIAL.
b. TO RETURN TO THE FIRST WINDOW: Press and hold SET, press CANCEL,
release both.
c. SETTING PISTONS: First window. Select desired Memory. Select desired
registration. Press and hold SET and press the piston to remember the registration.
Release both.
d. TO SELECT A MEMORY AND LOCK IT: First window. Select desired memory
using the CURSOR button and ROTARY DIAL. Press and hold MEM, enter three-
digit code, release MEM. "L" will appear.
e. TO UNLOCK A MEMORY: Repeat d. above. "L" will disappear.
f. TO UNLOCK ALL MEMORIES WITHOUT A CODE: Locate the display "Unlock
All Capture Memories". Press and hold MEM, press General Pistons 2-5-5, release
MEM. Window will display "Done!"
g. SELF-CHECK CAPTURE AND STOP ACTION: Advance to the display: "Self-
Check". Press Great Piston 1. To discontinue, Press and hold SET, press CANCEL,
release both, return to the Main window function.
29