Allen Organ Company Protege C-19C User Manual page 14

DIVISIONAL PISTONS PRE-PROGRAMMED MIDI SETTINGS - C-19c
Divisional Pistons are programmed for the four memories of the organ. Here is how it
works:
There are four divisional pistons for the Swell, and four for the Great/Pedal divisions.
You can choose one MIDI voice per piston and set them to Pistons 1 through 4.
This example programs the Oboe with Trem on Swell piston 3 of Memory 4:
1. Access Memory 4 in the Console Controller
2. Next, on the MIDI MDS-Expander II™, press the Division button until the arrow
is blinking at Swell (SW).
3. Next, press the Voice button, then use the Up/Down buttons to scroll to the Oboe.
Once the word "Oboe" appears in the window press the Trem button and an
asterisk (*) appears.
4. Next, press the Set button which is directly below the Trem button... the window
now displays "Please set capture...". Press Swell Divisional 3 piston and you have
now locked the Oboe with Trem onto this piston.
Note: The organ must be in "User" Mode for all of this to work properly. Check
the first window of the Console Controller to see if there is a "U" in the bottom right
corner. If not, scroll to Window 2 and set it to User. In Window 6 the Controller must be
set to "Low Bank".
Additional information about MIDI is included in the Console Controller Guide that
follows in this manual.
14