Allen Organ Company Protege C-19C User Manual page 21

selected division. You must return to the Main window function to store Divisional
registrations to this General piston (See Section A-4).
CONFIGURING DIVISIONAL PISTONS (Applicable for some models)
Several examples of how this feature might be used are: (1) Divisional Pistons can be
configured to respond like General Pistons. (2) Divisional Pistons normally will not
remember the settings of the Intermanual Couplers, (i. e., Swell to Great, Great to Pedal).
Divisional Pistons can be configured such that, the Intermanual Couplers' settings will be
remembered by the Divisional Pistons. (3) A Divisional Piston can be configured so that
it will only affect the Tremulant stops in all divisions.
MAKE DIVISIONAL PISTONS BECOME GENERAL PISTONS:
Advance to the Configure Pistons window function (See Section A-2). It will display:
"CONFIGURE PISTONS". Press the CURSOR button until the cursor is on the "D"
of disabled. Turn the ROTARY DIAL to change the display to ENABLED instead of
DISABLED.
Select all of the stops on the organ. Any stops not illuminated, will not be able to be
registered later. Press and hold the "SET" piston, then press the Divisional piston you
want to make respond like a General piston. This Divisional piston will now register
stops from all divisions. You must return to the Main window function to store
registrations to this General piston (See Section A-4).
TO ADD "SWELL TO GREAT" INTERMANUAL COUPLER TO GREAT
DIVISIONAL PISTONS:
Advance to the Configure Pistons window function (See Section A-2). It will display:
"CONFIGURE PISTONS". Press the CURSOR button until the cursor is on the "D"
of disabled. Turn the ROTARY DIAL to change the display to ENABLED instead of
DISABLED.
Select all of the Great Division stops, and the SWELL TO GREAT intermanual coupler.
Press and hold the "SET" piston, then press the Divisional Piston(s) that you want the
SWELL TO GREAT intermanual coupler assigned to. The Divisional piston(s) you
selected will now also register the SWELL TO GREAT intermanual coupler in your
registrations. You must return to the Main window function (See Section A-4) to save
registrations to the Divisional Pistons, using combinations of stops and the SWELL TO
GREAT coupler.
RECONFIGURE A DIVISIONAL PISTON TO CONTROL ONLY TREMULANT
STOPS:
Advance to the Configure Pistons window function (See Section A-2). It will display:
"CONFIGURE PISTONS". Press the CURSOR button until the cursor is on the "D"
of disabled. Turn the ROTARY DIAL to change the display to ENABLED instead of
DISABLED.
Select all of the organ's Tremulant Stops. Press and hold the "SET" piston, then press a
Divisional piston. The Divisional piston you have selected will now only control the
Tremulant stops. You must return to the Main window function (See Section A-4) to save
registrations on this Divisional piston to only control the Tremulant stops.
21