Allen Organ Company Protege C-19C User Manual page 22

REMEMBER: The above examples determine only which stops will become accessible
by the reconfigured pistons; they will not change previously saved registrations.
3. RESTORING ORIGINAL FACTORY SETTINGS
Advance to the Re-Initialize window function (See Section A-2). It will display: "RE-
INITIALIZE PISTON CONFIG." Certain functions can be restored to original factory
settings. These functions are (1) Piston Configurations, (2) Capture Memory 4, (3) MIDI
Settings. Each of these functions can be restored individually. To select one of these
factory settings to restore press the CURSOR button on the Console Controller™ until
the first letter of the bottom line is selected. Turn the ROTARY DIAL to select the item
you want to re-initialize. Once selected, press and hold the "MEM" button on the
Console Controller™, then press General Pistons 2-5-5 in sequence.
If the Piston Configure function was selected then the original factory piston
configuration settings have been restored. Follow this same procedure to restore each
factory setting.
C. MIDI FUNCTIONS
This section deals with the MIDI capabilities of your organ. Knowledge of this section
is not required for everyday use of the organ, normal service playing, or normal use of
Allen SmartMIDI™ devices.
determined by your needs, along with the type and capabilities of any external MIDI
devices you choose to use--e.g., sequencers, voice/sound modules, and external MIDI
keyboards. The MIDI topics covered by this manual are limited in scope, because this
section is written with the assumption that you possess an understanding of MIDI. You
need to understand the terms MIDI-IN, OUT, and THRU and their function. If you need
to increase your understanding of MIDI, there are other books that describe how to use
MIDI.
NOTE: You must also consult the owner's manual that covers the external MIDI device
you are using for more details.
1. STANDARD MIDI CHANNEL ASSIGNMENTS
These are the Allen Organ standard MIDI channels settings:
Classical Organs
Channel
1
2
3
4
5
6
7
8
NOTE: The Base Channel always resets to Channel 1 whenever the organ is turned ON
(see section C-6).
This information's usefulness, will ultimately be
Organ Division
Swell
Great
Pedal
Choir
Solo
Not Used
G1/G2 Pistons
General Pistons
Theatre Organs
Channel Organ Division
1 = Great
2 = Accompaniment
3 = Pedal
4 = Solo
5 Accomp. 2nd Touch
6 Not Used
7 T1/T2 Pistons
8 General Pistons
22