Download Print this page

Line Cord - Fender 65 REVERB TREMO AMP Owner's Manual

Advertisement

LINE CORD

Your amplifier is equipped with a grounding type supply cord to reduce the possibility of shock due to
electrical fault. Be sure to connect it to a grounded receptacle. DO NOT ALTER THE AC PLUG.
TUBES
The '65 REVERB TREMO AMP tube complement consists of four Sovtek 6L6GCs , four Electro Harmonix
12AX7A's, and two Electro Harmonix 12AT7's. Tube location is printed on the tube label, inside the cabinet.
TROUBLESHOOTER'S CHECKLIST
If the amp is set up but does not function, check the following items:
- Is the amp power cord properly plugged into an electrical outlet?
- Is there power at the outlet?
- Is the fuse blown?
- Are the speakers properly connected to the amplifier?
- Is the amp on standby?
- Are the amplifier volume and tone controls turned up above "three"?
- Is the volume control on the instrument turned up?
- Is your instrument properly plugged into the amplifier?
(Eliminate any effects pedals and try another guitar cord.)
If, after checking all of the above, the system is not performing correctly, consult your Amplifier Service
Center.
6

Advertisement

loading