Time Clock - Bosch Heatronic 4000 Installation & Operating Instructions Manual

Events / Day
The events / day can be either 4 or 2. An event is a time at
which the control changes the target temperature. The event
time can be set to the nearest 10 minutes. If you wish to have
the thermostat skip the event, enter "--:--" as the time. The "--:--"
time is found between 11:50 PM & 12:00 AM. See the table,
Events / Day, for more details regarding types of events.
Events / Day Event
Occupied 1
UnOccupied 1
4 events per day
Occupied 2
UnOccupied 2
or
Occupied
2 events per day
Unoccupied

Time Clock

The control has a built-in time clock to allow the control to operate on a schedule. A battery-less backup allows the control to
keep time for up to 4 hours without power. The time clock supports automatic adjustment for Daylight Saving Time (DST) once
the day, month, & year are entered. Use the Time menu to set the correct time, day, month, & year.
Requirements : The Setback / Off DIP Switch must be set to Setback before the Time menu can be accessed.
Heatronic 4000
24Hr Sat Sun
6:00 AM 6:00 AM 6:00 AM
8:00 AM 8:00 AM 8:00 AM
6:00 PM 6:00 PM 6:00 PM
10:00 PM 10:00 PM 10:00 PM
6:00 AM 6:00 AM 6:00 AM
10:00 PM 10:00 PM 10:00 PM
20 of 60
Mon Tue We
6:00 AM 6:00 AM 6:00 AM
8:00 AM 8:00 AM 8:00 AM
6:00 PM 6:00 PM 6:00 PM
10:00 PM 10:00 PM 10:00 PM
6:00 AM 6:00 AM 6:00 AM
10:00 PM 10:00 PM 10:00 PM
BTC461503101C | 6720810369 (2018/03)
Thu Fri
6:00 AM 6:00 AM
8:00 AM 8:00 AM
6:00 PM 6:00 PM
10:00 PM 10:00 PM
6:00 AM 6:00 AM
10:00 PM 10:00 PM