Siemens MICROMASTER 420 Getting Started Manual page 16

European Low Voltage Directive
The MICROMASTER product range complies with the
requirements of the Low Voltage Directive 73/23/EEC as
amended by Directive 98/68/EEC. The units are certified for
compliance with the following standards:
EN 60146-1-1 Semiconductor inverters - General
requirements and line commutated inverters
EN 60204-1 Safety of machinery - Electrical equipment of
machine
European Machinery Directive
The MICROMASTER inverter series does not fall under the
scope of the Machinery Directive. However, the products have
been fully evaluated for compliance with the essential Health &
Safety Requirements of the directive when used in a typical
machine application. A Declaration of incorporation is available
on request.
European EMC Directive
When installed according to the recommendations described in
this guide, the MICROMASTER fulfils all requirements of the
EMC Directive as defined by the EMC Product Standard for
Power Drive Systems EN50082-2.
Underwriters Laboratories
UL and CUL LISTED POWER CONVERSION EQUIPMENT
5B33 for use in a pollution degree 2
ISO 9001
Siemens plc operates a quality management system, which
complies with the requirements of ISO 9001.
To submit any suggestions for improvements, please visit the Siemens Standard
Drives Web Site at http://www.siemens.de/micromaster
*6SE6400-5AB00-0BP0*
Order Number: 6SE6400-5AB00-0BP0
Printed in England
Drawing Nr. G85139-K1790-U225-A1
16
Getting Started Guide – September 2000
6SE6400-5AB00-0BP0
Siemens plc
Automation & Drives
Standard Drives Division
Varey Road,
Congleton, CW12 1PH
United Kingdom