Selecting The Type Of Speaker (Speaker Screen); Initializing A Patch (Utility Screen) - Roland fm/am radio Owner's Manual

Selecting the Type of Speaker
(Speaker Screen)
In the Speaker screen you can select the type of the speaker.
Parameter Value
Speaker Switch OFF, ON
LINE
OLD
Speaker Type NEW
WURLY
TWIN
Description
Turns speaker on/off.
This is a sound via LINE OUT. No
speaker used.
Reproducing a typical Electric Piano
sound of the early '70s.
Reproducing a typical Electric Piano
sound of the late '70s through '80s.
Reproducing a typical Electric Piano
sound of the '60s.
This simulates playing through a
guitar amp.

Initializing a Patch (Utility Screen)

In the Utility screen you can initialize patches.
This operation lets you return the settings of the current patch to their
default values.
1. Select the patch that you want to initialize.
2. In the Utility screen, choose Patch Init.
3. When the confirmation screen appears, press the [F7
(OK)] button.
If you decide to cancel, press the [F8 (EXIT)] button.
* If you've installed the ARX-02 in a Fantom-G6/G7/G8, executing
a Factory Reset for the Fantom-G6/G7/G8 will reset the expan-
sion boards to their factory-set condition.
35