Audio Operations; Audio Input And Output Settings; Specifying The State Of Each Channel (State); Adjusting The Volume (Level) - Roland XS-42H Reference Manual

Audio Operations

Audio Input and Output Settings

You can adjust the volume (Level) of audio that is input or output,
and change the state (State) of each channel.
1
Long-press the [MENU] button 0 "Audio" 0 choose
"Mixer 1"
(OUTPUT HDMI 1/PHONES)
, and press the [ENTER] button.
HDMI 2/LINE OUT)
The XS-42H is equipped with an independent audio mixer for
each output channel.
Long-press the [MENU] button 0 "Audio" 0 select
"Mixer" and press the [ENTER] button.
Page 1/2
Page 2/2
2
Use the CURSOR [ ? ] [ = ] buttons to set each menu item.
3
Use the VALUE [–] [+] buttons to change the value of the
setting.
4
Press the [MENU] button several times to close the menu.
Specifying the State of Each Channel
1
Select the "State" of the input/output channel, and
specify its state.
Input
Value Explanation
MUTE The input audio is temporarily muted (mute function).
MIX The audio is input.
The video and audio switch in tandem (auto follow
function).
Audio is output only when an input channel's cross-point
FOLLOW
is selected.
If all input channels are set to "FOLLOW, " only the audio
of the currently selected cross-point is output, and other
audio is muted.
Output
Value Explanation
MUTE The output audio is temporarily muted (mute function).
MIX The result of the audio mix is output.
or "Mixer 2"
(OUTPUT
Input channel 1
Input channel 2
Input channel 3
Input channel 4
Output channel
(State)
Adjusting the Volume
1
Select the input channel's "Level," and adjust the volume.
If there is no input audio, or if you're not using the audio, set the
volume to "0. "
100 = 0.0 dB, 127 = +6.0 dB.
2
Select the output channel's "Level," and adjust the volume.
The color of the MASTER indicator indicates whether the volume
is adjusted appropriately.
Indicator
Lit color Status
Red
Yellow
Green
5 With the factory settings, operating the [MASTER] knob sets the
volume (Level) of OUTPUT HDMI 1 and 2 to the same value.
5 The MASTER indicator shows the volume level of OUTPUT HDMI 1.
Matching the Output Timing of the Video and
Audio
(Delay)
By delaying the output of the audio, you can match the output
timing of the video and audio.
1
Select "Delay"
(page 2/2)
2
Select the Delay "Time," and specify the time by which to
delay the audio.
Selecting the Audio Source of Input
Channel 4
Here's how to select the audio source that is input to input channel 4.
You can also output a test tone.
5 With the factory settings, this is set to "Line" (line input).
1
Long-press the [MENU] button 0 "Audio" 0 select "Ch.4
Source."
2
Use the VALUE [–] [+] buttons to specify the audio source
that will be input.
Value Explanation
HDMI 4
Input audio from the INPUT HDMI 4 connector
Line Input audio from the LINE IN jacks
Test Tone
Test tone
3
Press the [MENU] button several times to close the menu.
(Level)
Volume is excessive.
Volume is appropriate.
Volume is insufficient.
, and set it to "Enabled."
11