Roland fm/am radio Owner's Manual page 29

MFX 06: FLANGER
Parameter Value
Adjusts the delay time from the direct
Pre Delay 0.0–100 ms
sound until the flanger sound is heard.
When this is set to ON, the effect is
Sync OFF, ON synchronized with the tempo.
0.05–
Rate 10.00 Hz, Frequency of modulation
note
Depth 0–127 Depth of modulation
Phase 0–180 deg Spatial spread of the sound
Adjusts the proportion of the flanger
Feedback -98–+98 % sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
D100:0W– Volume balance between the direct sound
Balance
D0:100W (D) and the flanger sound (W)
Level 0–127 Output Level
Description
See "About Note" (p. 36).
MFX 07: DELAY
Parameter Value
When this is set to ON, the effect is
Sync OFF, ON synchronized with the tempo.
0–1300 ms, Delay time from when sound is input to
Delay Time
note delay until the delay sound is heard.
When you change the delay time, this
setting specifies the time over which it will
change from the current delay time to the
Acceleration 0–15
new setting.
Specifies the percentage (%) of the delay
sound that will be returned to the input.
Feedback -98–+98 %
Specifies the frequency at which to cut the
200– high range of the delay sound returned to
HF Damp 8000 Hz, the input.
BYPASS
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
D100:0W– Volume balance between the direct sound
Balance
D0:100W (D) and the delay sound (W)
Level 0–127 Output Level
Description
See "About Note" (p. 36).
The speed of pitch change will change
together with the delay time.
Positive (+) settings return the sound at
the original phase, and negative (-) set-
tings return the phase-reversed sound.
Choose the BYPASS setting if you don't
want to cut.
29