System Setup Page - Garmin G500 Reference Manual

AUX GROUP
Setting Brightness and Mode
1) While viewing the System Setup Page of the Aux Page Group, press the small
MFD knob. The LEVEL in the DISPLAY BRIGHTNESS box will fl ash.
2) Turn the small MFD knob to brighten or dim the display.
3) Press ENT when you reach the desired level.
NOTE: When LEVEL is changed, the MODE defaults to MANUAL. If
MODE is set the AUTO, the LEVEL will adjust in response to ambient
light or a lighting bus, as confi gured during installation.
Setting Airspeed References
1) While viewing the System Setup Page of the Aux Page Group, press the small
MFD knob. Turn the large MFD knob to move to the desired fi eld in the
AIRSPEEDS box.
2) Turn the small MFD knob to change the speeds and to also turn the speeds
ON or OFF. When the speeds are turned ON they are shown near the bottom
of the Airspeed Tape if airspeed is zero.
V Speed References on Airspeed Tape
NOTE: At any time during the setting of your airspeed references,
pressing the DFLT SPD soft key will restore the unit to its initial
confi guration.
50

System Setup Page

Soft Keys Found on System Setup Page
G500 Cockpit Reference Guide
Airspeed References
190-01102-03 Rev G