Decluttering (Dcltr) The Map Pages - Garmin G500 Reference Manual

Avionics display system

Hide thumbs Also See for G500:

Table of Contents

Decluttering (DCLTR) the Map Pages

There are four levels of decluttering, DCLTR, DCLTR-1, DCLTR-2, and

DCLTR-3. DCLTR shows the most detail while DCLTR-3 removes most detail.

While viewing Navigation Map 1 or Navigation Map 2 page of the Map Page

Group, press the DCLTR soft key. Each successive press of the DCLTR soft key

will toggle through the declutter levels.

Turning on Map Overlays

While viewing Navigation Map 1 or Navigation Map 2 of the Map Page Group,

press the MAP soft key. Select the Trafﬁ c, TOPO, or Terrain overlays by pressing

the appropriate soft key.

Measuring Distances

1) While viewing Navigation Map 1 or Navigation Map 2 of the Map Page

Group, press MENU.

2) Turn the large MFD knob or the small MFD knob to highlight "Measure

Bearing/Distance" and then press ENT.

3) Turn the large MFD knob or small MFD knob to move the map pointer. The

distance, bearing, and coordinates are displayed at the top of the screen.

Distance, Bearing and Coordinates Display

4) Press ENT to reset the distance and bearing values.

5) Press the small MFD knob to stop measuring.

190-01102-03 Rev G

G500 Cockpit Reference Guide

MAP GROUP

Measuring Map Pointer

Table of Contents