Table of Contents
Advertisement
Using software
Cut Map
When you have designated your map area, click the
Cut Map
tool. The Cut Map dialog box appears
as shown on the left.
You must enter a map name and description. If you
have entered a name that already exists, the unit
prompts you to enter a different name.
You can click the Estimate button to display the map
size. This is an important feature when memory
space is limited.
Load Map
On the Navigation Console, you can refresh your
maps by clicking Tools>Refresh New Map Data.
Select the map that you wish to load by clicking on
the map image or select it from the list. A checkmark
represents a selected map.
From the Target Device panel, click the Change
button to specify where to install the map. You can
choose Removable Disk. After you have selected
your target device and have confirmed that there's
sufficient memory, click the Install/Remove Maps
button. Your selected maps are installed and then
appear in the Installed Maps panel.
Remove Map
In the Target Device panel, click the Change button
and select the location from where to remove the
map. You can choose Storage Disk. This updates the
Installed Map panel.
The Installed Map panel displays a list of all the
loaded maps available. Select the check box by the
map you want to remove. Click the Install/Remove
Maps button to remove the selected map.
70
Advertisement
Table of Contents
