Finding a location with navigation
Go to your Destination
After you have specified the address, tap the Next
button. The Navigator shows your destination on the
Map screen before calculating a route. Check that
the destination address is correct at the top of the
screen. If you want to change the destination, tap the
Back button and change your address entries. When
you are ready, tap the GO! button to create a route to
your selected destination.
1. Next Screen
2. Show on Map
3. Calculate Route
Demo
When you click the Demo button, the Navigator
moves the cursor along the path you would take
toward your destination.
You can review the route you would go on before
instructing the Navigator to calculate your route and
specify roads to avoid by tapping the Avoid Roads
button on the Map Look & Feel menu. For more
information, see "Avoid Roads" on the page 51.
You may get inaccurate information in the Demo
mode (particularly in distances over 300 km).
However, information is much more accurate in real
driving conditions.
39